Filtrata Boiler Info: Efficient Hot Water Solutions
WHAT IS HARD WATER?
If you own, or are considering purchasing a Filtrata 4 in 1 Boiling Water Tap it’s extremely important to change the filter on your boiler to prevent damage and breakage. The frequency of changing your filter depends on the hardness of the water in your area. If you live in a hard water area the filter should be changed every three months. For medium water areas, the filter should be replaced every four months and for soft water areas, it’s recommended to change the filter every six months. If you fail to adhere to the recommended schedule this will void the warranty.
HOW HARD IS MY WATER?
Hard water contains high mineral contents such as, magnesium and calcium. These minerals are formed when water comes into contact with the ground and rocks causing it to turn into hard water.
Water is most likely to be hard if it comes from a source near limestone or chalk rocks. If water comes into contact with non-porous rocks such as granite, the water cannot penetrate the ground or pick up any minerals causing it to stay soft.
The South East of England and London water hardness levels are predominantly high. Scotland, Ireland and Wales are soft water areas.
| PPM | WATER HARDNESS |
| 0 - 50 | Soft |
| 51- 100 | Moderately Soft |
| 101 - 150 | Slightly Hard |
| 151 - 200 | Moderately Hard |
| 201 - 275 | Hard |
| 276 - 350 | Very Hard |
| 300+ | Extremely Hard |
WHAT ISSUES MAY OCCUR IN HARD WATER AREAS?
As hard water makes its way into our homes, it causes a build-up of limescale in kitchen appliances such as kettles and taps. This creates an unattractive surface and makes it harder to clean.
If left untreated it can cause damage to pipes and plumbing, reducing overall effectiveness and heat retention - increasing gas and electricity bills. In the extreme, it could create blockages that break appliances and even your boiler, which can be costly.
Read below to discover more issues limescale can cause.
- Blocked valves
- Reduced bores in pipework
- Less efficient appliances
- Increased electricity and gas bills
- Harder to clean appliances
- Boiler breakage
- Unattractive surface appearance
- Limescale build-up
For accurate information regarding your water hardness, please consult your local water provider.
HOW IS HARD WATER MEASURED?
Hard water is measured in parts per million (PPM) and is defined by how many particles of hardness are dissolved in the water per million particles. Please see below, the hard water ratings.
Featured collection
-
Filtrata Brushed Gold 4 in 1 Boiling Water Kitchen TapRegular price 3,935.00 AEDRegular priceUnit price per
-
Filtrata Brushed Nickel 4 in 1 Boiling Water TapRegular price 3,935.00 AEDRegular priceUnit price per
-
Filtrata Matte Black 4 in 1 Boiling Water TapRegular price 3,935.00 AEDRegular priceUnit price per
-
Filtrata Clarence Brushed Gold 4 in 1 Traditional Boiling Water TapRegular price 4,490.00 AEDRegular priceUnit price per
-
Filtrata Clarence Polished Nickel 4 in 1 Traditional Boiling Water TapRegular price 4,490.00 AEDRegular priceUnit price per
-
Filtrata Clarence Chrome 4 in 1 Traditional Boiling Water TapRegular price 4,490.00 AEDRegular priceUnit price per
-
Filtrata 101 Brushed Gold 4 in 1 Boiling Water Kitchen TapRegular price 3,935.00 AEDRegular priceUnit price per
-
Filtrata 101 Brushed Nickel 4 in 1 Boiling Water TapRegular price 3,935.00 AEDRegular priceUnit price per
